Stonehenge 2000 Clock


  The wall mounted sculpture recreates the most ancient relics of the Stonehenge monument, showing the stones as they would probably have looked when first built.  
  Colin Rayne says "I worked with the same purpose as the stone age people; to stimulate my mind, body and imagination to full capacity in making a cultural contribution to my local community.  
 

The wall mounted horological sculpture measures 48" by 22".

Twelve "Sarsen Stones" light individually to indicate the hour and 30 "Lintel Stones", each divided into two, light individually to indicate the minute.

All 72 lights are LED's, housed within transparent acrylic. The remainder of the larger stones are of MDF.

 
 

The clock circuitry is based on 4.193mhz crystal, divided into minutes and hours.

The LED's are driven from serial shaft registers. CMOS logic is used.

The clock is designed for swift adaption to receive radio signals from the BT transmitter at Rugby for seasonal hour change by radio control.

 
  Colin Rayne has said of the clock "It is intended to mark both past and present achievement in the field on human endeavour, and to identify with, and be of interest and encouragement to, both patients and staff of the Royal Sussex County Hospital.  
  The "Bluestones" and "Alter Stone" on the clock are "Spotted Dolerite" from the Presili Hills, South Wales. Similar stone is used in the actual monument at Stonehenge.  

© copyright owned by The House of Rayne 2003